tiny accessory request: (MVB-1 monitor adapter)

[Stout Film]

For those of us who don't always like to use the MVF-1 as their main way to view the image, it would be great if there was a small 1x2" wedged piece of metal that fit in the MVB-1 receptacle with a 1/4-20 screw on it that could attach 1/4-20 side mount monitors (like the SmallHD 502, etc). That way we could use the fluid tilt of the MVB-1 with a monitor right there, and it would be quick release and all. If Arri doesn't come out with one, I think it would be a pretty easy thing for someone to machine if they knew how to do that sort of thing.

[Michael L]

Do you mean like this? This one is for the smalHD sidefinder

https://www.bhphotovideo.com/c/product/ ... small.html

They have a bunch of them for different cameras there might be one that suits you.

[Silvan Liu]

As Michael has stated above there are several Viewfinder Brackets available from ARRI. You can find them along with pretty much all our other accessories in the configuration overview located here:
https://www.arri.com/camera/alexa/tools ... overviews/

The relevant page for these is labeled 6.2.0 Accessories for 3rd Party Cameras under "Support Systems"

[Stout Film]

oh wow, I'm so glad I wrote about this, I had no idea those existed, so thank you. I don't see one that would really work with the SmallHD 503 directly (or the 502/702, etc). I've never been keen on that sidefinder at all. I'm sure the rosette one for the Zacuto would work on a monitor to a degree but scratch up the side of the monitor. Wish Arri would make one with a 1/4-20 (and ideally one for SmallHD that had those 2 locating pin holes). Or am I not seeing something (again, haha).
thanks!