hello
i can’t remember if it was back in SUB 4 or even earlier.
there was this feature on the EVF.
Zoom Position > ZOOM TOGGLE
you could toggle around your frame in about 9 different aereas, in the EVF (while being zoomed in)
Now you can still Zoom but i did not find the ZOOM TOGGLE (or is it removed?)
This function was very uesfull, e.g for getting focus on a locked camera, and when tesrting lenses during check out, and for an operator during a shot.....
many thanks for a short feedback
best, juergensen
EVF zoom TOGGLE
-
- Posts: 38
- Joined: Mon Nov 23, 2015 7:11 pm
- Location: Burbank, California
Hi Juergensen,
you can still move the zoom position around. When you're zoomed into the image on the viewfinder simply turn the menu wheel and the zoom position will increment through all the options.
This only works if the live image is viewed on the LCD screen, so when there is no menu to operate.
hope this helps.
you can still move the zoom position around. When you're zoomed into the image on the viewfinder simply turn the menu wheel and the zoom position will increment through all the options.
This only works if the live image is viewed on the LCD screen, so when there is no menu to operate.
hope this helps.
Silvan Liu
ARRI Service - Burbank, California
ARRI Service - Burbank, California
-
- Posts: 6
- Joined: Thu Aug 31, 2017 8:57 am
Hi Silvan Liu
Many thank's for your reply!
Will check that next week on my prep day.
Best, Juergensen
Many thank's for your reply!
Will check that next week on my prep day.
Best, Juergensen
-
- Posts: 6
- Joined: Thu Aug 31, 2017 8:57 am
Hi Silvan Liu
all good on the zoom toggle. thanks again!
all good on the zoom toggle. thanks again!
-
- Posts: 38
- Joined: Mon Nov 23, 2015 7:11 pm
- Location: Burbank, California
Glad to hear it. Hope you enjoy working on your project.
Silvan Liu
ARRI Service - Burbank, California
ARRI Service - Burbank, California