Colour Bars in SUP 4.1
-
- Posts: 41
- Joined: Thu Nov 26, 2015 6:35 pm
- Location: Munich, Germany
- Contact:
Dear Perry,
not sure what kind of problem you have. When in factory reset state MENU > MONITORING > COLOR BARS = ON enables COLOR BARS on both SDI outputs.
Same can be done by assigning a USER BUTTON: MENU > USER BUTTONS > CAMERA USER BUTTONS > BUTTON 1 = COLOR BAR.
There is one known bug in UHD 6G SDI mode for SUP 4.1.10, citing release notes:
• no COLOR BARS output with 6G SDI
In 4K UHD mode, COLOR BARS are not displayed on the SDI output when this is set to 422 6G SDI.
Best regards, Andreas
not sure what kind of problem you have. When in factory reset state MENU > MONITORING > COLOR BARS = ON enables COLOR BARS on both SDI outputs.
Same can be done by assigning a USER BUTTON: MENU > USER BUTTONS > CAMERA USER BUTTONS > BUTTON 1 = COLOR BAR.
There is one known bug in UHD 6G SDI mode for SUP 4.1.10, citing release notes:
• no COLOR BARS output with 6G SDI
In 4K UHD mode, COLOR BARS are not displayed on the SDI output when this is set to 422 6G SDI.
Best regards, Andreas
--
Andreas Berkl
Digital Camera Specialist ARRI
Andreas Berkl
Digital Camera Specialist ARRI