WCU-4 & SONY Venice

Thu Oct 25, 2018 2:30 am

Hi, I´m working with SONY Venice cameras and the WCU4 + AMC1 and was wondering if there´s any way we could record remotely from the hand unit.

The rental house that is providing us the equipment says it doesn´t exist yet any cable that can connect the motor control unit and the camera. Is this true?

Even if it didn´t exist one in your catalogue, it could be possible to make one to connect the camera (24V OUT connector (DC OUT 24 V, Fischer3-pin) or AUX connector (LEMO 5-pin) ) to the motor control unit (CAM Connector 10-pin)?

You can work with out this feature but is a pain in the neck.

Thanks a lot!
Posts: 16
Joined: Sat Jan 30, 2016 11:42 pm

Re: WCU-4 & SONY Venice

Wed Oct 31, 2018 11:25 am

Hei Daniel,

I've had a chat with our ECS Team: ... since it's "all Sony", you can use Cable CAM (10p) - Sony F5/55 (K2.0001997)
or the Cable CAM (10p) - RS (3p) (K2.0001606) for start/stop.

Jan Heugel
Application Engineer
Jan Heugel
Posts: 377
Joined: Wed Aug 13, 2014 3:15 pm
Location: Munich, Germany

Return to ECS