ALSM not seeing L7-C or L10-C

Post Reply
alexsmall
Posts: 2
Joined: Tue Nov 19, 2019 11:38 am

Hi all, I'm attempting to update the firmware on a few lamps - 2x L7-C and 1x L10-C.
None of them are showing up in the ALSM software. My MacBook can see the lamp is attached over USB, but they're not showing in the software.

Does anyone have any ideas?
Florian Bloch
Posts: 5
Joined: Mon Nov 30, 2015 4:01 pm

Hi Alex,

my answer is pretty late but it seems you got the answer already via our Service guys. The OS you are using is yet not support by the ALSM. We already put this on our to do list for next update. Sorry for no solution answer.

Regards
Florian
alexsmall
Posts: 2
Joined: Tue Nov 19, 2019 11:38 am

Hi Florian
Thanks for getting back to me - the software was behaving the same under the previous version of OS X as well (I'd emailed support back in July.
I'll see if I can find a laptop with OS X 10.13 on it if this is the most recent supported operating system.
Thanks!
Florian Bloch
Posts: 5
Joined: Mon Nov 30, 2015 4:01 pm

Hi Alex,

please keep me posted if you managed to test again with a previous OSX version. It would be perfect if you could record the ALSM behaviour while testing. I could share an upload link if needed.

Thank you and regards
Florian
Post Reply