Hi- wondering if anybody has tried the ETC Colorsource 20 or 40 that has oriented itself to control LEDs? Getting tired of using older boards where 4-7 channels are used up with each SkyPanel when all I need 90% of the time is intensity and CCT.
Alan Steinheimer SF Bay Area gaffer
LED-friendly console for controlling LEDS (& Skypanels)
-
- Posts: 57
- Joined: Mon Nov 23, 2015 8:42 pm
- Contact:
Alan,
I don't know much about the Colorsource products, but if you change the DMX protocol version on the SkyPanel to version 3.4 - you can use DMX mode 2 and this only take 3 channels (intensity, CCT, and G/M). This might solve you channel limitation issue.
You can also try our new app Stellar where you channel count doesn't really matter any more.
Hope this helps.
- Mike Wagner
Senior Product Manager, ARRI
I don't know much about the Colorsource products, but if you change the DMX protocol version on the SkyPanel to version 3.4 - you can use DMX mode 2 and this only take 3 channels (intensity, CCT, and G/M). This might solve you channel limitation issue.
You can also try our new app Stellar where you channel count doesn't really matter any more.
Hope this helps.
- Mike Wagner
Senior Product Manager, ARRI