LED-friendly console for controlling LEDS (& Skypanels)

Post Reply
AlanSteinheimer
Posts: 3
Joined: Tue Dec 04, 2018 7:54 pm

Hi- wondering if anybody has tried the ETC Colorsource 20 or 40 that has oriented itself to control LEDs? Getting tired of using older boards where 4-7 channels are used up with each SkyPanel when all I need 90% of the time is intensity and CCT.
Alan Steinheimer SF Bay Area gaffer
Mike Wagner
Posts: 57
Joined: Mon Nov 23, 2015 8:42 pm
Contact:

Alan,

I don't know much about the Colorsource products, but if you change the DMX protocol version on the SkyPanel to version 3.4 - you can use DMX mode 2 and this only take 3 channels (intensity, CCT, and G/M). This might solve you channel limitation issue.

You can also try our new app Stellar where you channel count doesn't really matter any more.

Hope this helps.

- Mike Wagner
Senior Product Manager, ARRI
Post Reply