Sky panel run trough Grandma2 GEL issue

Wed Jun 23, 2021 10:09 am

Hi all, I am running a few 360's and some 60's
with GrandMa2 and I want to use Gels. So, in the fixture
itself there are many Gels loaded by manufacture.
How to run that Gels from GrandMa2? I tried Gels mode,
but I get only few Gels on the console. Well, I choose
gel manufacture, then I choose the type (colorcorection, or 600, or 700 series)
And I get only about 50 Gels or so... :shock:
backstage1978
 
Posts: 2
Joined: Tue Jun 15, 2021 10:05 pm

Re: Sky panel run trough Grandma2 GEL issue

Thu Jun 24, 2021 12:03 pm

Hi, maybe you can check if you've got the most updated profiles on the console. here is the download link for most updated profiles and GDTF files:
https://www.arri.com/en/lighting/led/sk ... nformation
As confirmed, also it's possible that there might be more than one selections at one Botton you can chose at UI.
Hope this helps.

Regards,
Nancy
Nancy Liu
 
Posts: 6
Joined: Tue Nov 26, 2019 7:23 am

Re: Sky panel run trough Grandma2 GEL issue

Tue Jun 29, 2021 9:50 am

Yes thank you Nancy! I have the latest profiles and I check all the buttons.
Still the same...I don't believe how restricted is the profile for GrandMa2.
If a gaffer wants me to make the panel warmer, I can't!? The bottom is 2800k
But the panel itself have a warm function, I don't have it on the console...
That is very strange...Today a gaffer ask me to set the panel on 3200k
and add a 1/2 CTO. But there is no option to add CTO or CTB...
backstage1978
 
Posts: 2
Joined: Tue Jun 15, 2021 10:05 pm

Re: Sky panel run trough Grandma2 GEL issue

Wed Dec 01, 2021 3:23 am

backstage1978 wrote:Yes thank you Nancy! I have the latest profiles and I check all the buttons.
Still the same...I don't believe how restricted is the profile for GrandMa2.
If a gaffer wants me to make the panel warmer, I can't!? The bottom is 2800k
But the panel itself have a warm function, I don't have it on the console...
That is very strange...Today a gaffer ask me to set the panel on 3200k
and add a 1/2 CTO. But there is no option to add CTO or CTB...


Hi, Backstage!
Sorry i am late to the party here. If you go to the MA2 Fixture Share site, we have figured out a way to convince the console to recognize and populate the proper gels for the categories related to the manufacturer. Make sure you tick the "Manufacturer" box.
https://fixtureshare.malighting.com/sha ... &manu=ARRI
Patrick Schulze
 
Posts: 6
Joined: Fri Nov 02, 2018 2:02 am

Return to LED fixtures