Hello,
I am trying to figure out if the skypanels can be phase aligned in high speed mode or if the phase can be offset via some sort of TTL signal?
As an example, I'd like to use up to 6 lights and offset the strobing so that they fire in a sequence, instead all at the same time... I am assuming DMX would be too slow for such functionality.
Thanks,
Dejan.
Skypanels synchronisation in High Speed Mode
-
- Posts: 14
- Joined: Wed Jun 22, 2022 2:41 pm
Hi Dejan,
The SkyPanels work well for high speed photography, but they do not offer a high speed sync functionality. I agree that DMX might not be fast enough, depending on what you're doing. I'd recommend running a test to make sure.
The SkyPanels work well for high speed photography, but they do not offer a high speed sync functionality. I agree that DMX might not be fast enough, depending on what you're doing. I'd recommend running a test to make sure.
Brian Doran
Product Specialist, Lighting
ARRI Americas
Product Specialist, Lighting
ARRI Americas