ARRI Forum

Hi all, I am running a few 360's and some 60's
with GrandMa2 and I want to use Gels. So, in the fixture
itself there are many Gels loaded by manufacture.
How to run that Gels from GrandMa2? I tried Gels mode,
but I get only few Gels on the console. Well, I choose
gel manufacture, then I choose the type (colorcorection, or 600, or 700 series)
And I get only about 50 Gels or so...

Hi, maybe you can check if you've got the most updated profiles on the console. here is the download link for most updated profiles and GDTF files:
https://www.arri.com/en/lighting/led/sk ... nformation
As confirmed, also it's possible that there might be more than one selections at one Botton you can chose at UI.
Hope this helps.

Regards,
Nancy

Yes thank you Nancy! I have the latest profiles and I check all the buttons.
Still the same...I don't believe how restricted is the profile for GrandMa2.
If a gaffer wants me to make the panel warmer, I can't!? The bottom is 2800k
But the panel itself have a warm function, I don't have it on the console...
That is very strange...Today a gaffer ask me to set the panel on 3200k
and add a 1/2 CTO. But there is no option to add CTO or CTB...

backstage1978 wrote:Yes thank you Nancy! I have the latest profiles and I check all the buttons.
Still the same...I don't believe how restricted is the profile for GrandMa2.
If a gaffer wants me to make the panel warmer, I can't!? The bottom is 2800k
But the panel itself have a warm function, I don't have it on the console...
That is very strange...Today a gaffer ask me to set the panel on 3200k
and add a 1/2 CTO. But there is no option to add CTO or CTB...

Hi, Backstage!
Sorry i am late to the party here. If you go to the MA2 Fixture Share site, we have figured out a way to convince the console to recognize and populate the proper gels for the categories related to the manufacturer. Make sure you tick the "Manufacturer" box.
https://fixtureshare.malighting.com/sha ... &manu=ARRI