Page 1 of 1
Arri Hi5-Alexa lf-cforce mini-cforce RF keeps calibrating by itself
Posted: Wed Nov 30, 2022 6:32 pm
by Quiet_overlord
Hello I'm a Belgian puller filming in Iceland and over the course of the shoot the motors decide to recalibrate by themselves.
The setup is lbus to l-cube lbus to cforcemini lbus to cforce RF on client.
Re: Arri Hi5-Alexa lf-cforce mini-cforce RF keeps calibrating by itself
Posted: Mon Jan 30, 2023 1:07 pm
by ARRI-ECS-Service-Team
Hi,
unfortunately there is a software bug in the CUB-1 that can result in this behavior.
To prevent this from happening I always advice to put the CUB-1 on the end of your LBUS daisy chain. Not in between motors or between Camera and motors.
For example:
Camera LBUS mount -> LBUS cable -> cforce motor (F) -> cforce motor (I) -> CUB-1 -> UDM-1 / Cinetape/ Cine RT
If you still experience issues, try updating all devices to the latest SUPs:
https://www.arri.com/en/technical-servi ... e-packages
all the best,
Daniel
Re: Arri Hi5-Alexa lf-cforce mini-cforce RF keeps calibrating by itself
Posted: Wed Jul 19, 2023 7:42 pm
by Quiet_overlord
ARRI-ECS-Service-Team wrote: ↑Mon Jan 30, 2023 1:07 pm
Hi,
unfortunately there is a software bug in the CUB-1 that can result in this behavior.
To prevent this from happening I always advice to put the CUB-1 on the end of your LBUS daisy chain. Not in between motors or between Camera and motors.
For example:
Camera LBUS mount -> LBUS cable -> cforce motor (F) -> cforce motor (I) -> CUB-1 -> UDM-1 / Cinetape/ Cine RT
If you still experience issues, try updating all devices to the latest SUPs:
https://www.arri.com/en/technical-servi ... e-packages
all the best,
Daniel
Will give this a try and report back!