Page 1 of 1
Updating firmware of CCP-1
Posted: Sun Jun 18, 2017 4:42 am
by keith.miyamoto
Hi everyone,
We recently purchased 3x "K0.0010096 CCP-1 for ALEXA Mini", and found out that one of them have older firmware installed.
(2x ver. 1.19 and 1x ver. 1.17)
Could you please advise us where can we download the latest firmware file and how to update them?
Thank you for your support,
Best,
Keith
Re: Updating firmware of CCP-1
Posted: Mon Jun 19, 2017 4:03 am
by Silvan Liu
Hi Keith,
the software of the CCP-1 will be updated if it is connected to an AMIRA or ALEXA mini while a camera update is performed. The same is true for the MVF-1 by the way.
Cheers
Silvan
Re: Updating firmware of CCP-1
Posted: Tue Jul 11, 2017 11:53 am
by keith.miyamoto
Dear Silvan,
Thank you for your information.
Does the same method work on cforce motors (mini/plus)?
Best,
Keith
Re: Updating firmware of CCP-1
Posted: Wed Jul 12, 2017 2:20 pm
by Georg Lanz
For the Cforce motors you have to place the update file (*.cmf) on your Usb Stick in the folder /ARRI/ECS.
On your Mini navigate to MENU > SYSTEM > UPDATE > LBUS > and select the device you want to update. You might want to make sure that your Mini has a sufficiently charged battery so that there is no power interrupt while the update is running.
Re: Updating firmware of CCP-1
Posted: Thu Jul 13, 2017 10:52 am
by keith.miyamoto
Dear Georg,
Thank you for reply.
Please let me ask one more thing; where can I get the latest firmware of cforce mini?
Unlike cforce plus, I could not find firmware on the download section of webpage.
Best,
Keith
Re: Updating firmware of CCP-1
Posted: Mon Jul 24, 2017 12:30 pm
by keith.miyamoto
Dear Georg,
We found a download page which provides latest ARRI firmware on cmotion website.
https://cmotion.eu/service_download
lcube_cub-2-1.0.6
lcube-cub-1-2.0.2
cforce_plus-1.1.3
cforce_mini-1.2.7
Can we consider this as an official ARRI firmware?
Best,
Keith
Re: Updating firmware of CCP-1
Posted: Wed Jul 26, 2017 10:53 am
by Jan Heugel
Hey Keith,
cmotion is our partner company, so yes I'd second that.
Cheers,
Jan