Cforce RF Red control cable issues

Tue Mar 05, 2019 9:16 pm

Tested my Red control cable yesterday and could not get it to work. Tried two separate cforce mini RF motors, with both sxu-1 and wcu-4, on two separate DSMC2 bodies and had the same issue. As soon as I select Red control protocol in the menu, connection is lost between cforce rf and hand unit, and will not re-link unless control port cable is removed or deactivated.
JamesJLamberg
 
Posts: 1
Joined: Mon Oct 29, 2018 6:44 am

Re: Cforce RF Red control cable issues

Mon Jul 01, 2019 10:20 am

Sorry for the issues. We found a software glitch in cforce mini RF that can cause this behaviour. We will release a fix soon!

Regards,
Hendrik
Hendrik Voss
 
Posts: 11
Joined: Mon Nov 30, 2015 6:29 pm

Re: Cforce RF Red control cable issues

Fri Oct 18, 2019 12:28 pm

You could try the Fischer 3 pin cable if you have the Box or some other module with a fischer port.











Sarkari Result Pnr Status 192.168.1.1
nateliv
 
Posts: 8
Joined: Tue Dec 25, 2018 12:16 pm

Return to ECS