Arri BPA-3 Rosette Question

Mon Mar 18, 2019 5:52 pm

Question regarding the Arri BPA-3 rosette on Amira:

I bought a SmallRig handgrip and rosette arm to attach to BPA-3, but the mounting hole seems to be too short to tighten either onto the camera. Is there a rigging solution to this or did I purchase the wrong accessories?

Images below. Thoughts?

https://drive.google.com/drive/u/1/f...BPJx2t92CVDGSj

Edit: BPA-3 bridgeplate not BP-9
Last edited by alexmonto on Mon Apr 08, 2019 1:16 am, edited 2 times in total.
alexmonto
 
Posts: 1
Joined: Sat Mar 16, 2019 9:22 pm

Re: Arri BP-9 Rosette Question

Sat Mar 30, 2019 12:01 pm

Hi Alex,

there could be two reasons:
- the screw of the SmallRig handgrip is too long (longer than usual)
- the thread of the ARRI plate is not deep enough

Please get in touch with our service department (service@arri.de). If you have the possibility to send it to our service department they can check if it is the first or the second reason. Either or, if you want to use the SmallRig hand grip I think the tread could be made a bit deeper.
Have your tried to mount a hand grip from another company on the ARRI plate or the hand grip from SmallRig to another rosette?

All the best,
Philip Vischer
Product Manager PCA mechanical
Philip Vischer
 
Posts: 2
Joined: Mon Nov 30, 2015 10:22 am

Return to AMIRA