Page 1 of 1
Arri Mini LF with 2X Anamorphic Lens Compatibility
Posted: Sat Mar 30, 2019 12:53 am
by Felix
Hello,
I have some workflow questions. With Mini LF, what is the proper settings for a 2X Anamorphic Lens when shooting with Arriraw or ProRes? Is there a 4:3 or a 6:5 mode?
Thank you.
Re: Arri Mini LF with 2X Anamorphic Lens Compatibility
Posted: Tue Apr 02, 2019 11:45 am
by Jan Heugel
Dear Felix,
initially there won't be a dedicated sensor mode for that. Mini LF will have the same modes/formats as ALEXA LF.
It's a tough decision which sensor modes should come (2.0, 1.3, 1.5? - only full frame? both)... and suddenly you have a long list in Excel that causes headaces with our UIX team and the testing department
I suggest you use Open-Gate (ProRes or ARRIRAW - your decision) and 2.0 de-squeeze settings for monitoring/metadata.
Cheers,
Jan
Re: Arri Mini LF with 2X Anamorphic Lens Compatibility
Posted: Wed Apr 03, 2019 6:46 am
by Felix
Thank you Jan for your reply.
Just for further clarification.
Mini LF's Open Gate is 4448 X 3096. When applied 2X de-squeeze in post, it would yield, 8896 x 3096?
If I would have to scale down to a 4096 X 1716 time timeline, I would have an extra of 417px on both sides?
I believe it would really benefit all user from various categories if there are various sensor modes like 4:3 or 6:5 available like other brands.
Thank you Jan.
Re: Arri Mini LF with 2X Anamorphic Lens Compatibility
Posted: Fri Apr 05, 2019 10:27 am
by Jan Heugel
Hey Felix,
a de-squeeze will leave you with 8896*3096, yes.
For 2.39 I use 4096x1714. That would leave you with 415 pixels on each side.
Not to brag, but 4:3 and 6:5 are sensor modes of our S35 cameras... so be assured that we will definitely consider the most common modes!
Cheers,
Jan
Re: Arri Mini LF with 2X Anamorphic Lens Compatibility
Posted: Sun Jan 26, 2020 8:20 pm
by Joachim Heden
So...
To be clear -- if you do a good job in the frameline composer, there are really no downsides to using an LF for anamorphic capture (other than that you will be wasting card space on recording a lot of black).
I've not used the frameline composer yet, but the "scaling" feature allows you to scale the VF/Mon chain?
All the best,
J
Re: Arri Mini LF with 2X Anamorphic Lens Compatibility
Posted: Wed Jan 29, 2020 11:33 am
by Jan Heugel
Dear Joachim,
yes to your anamorphic question.
The Frameline Composer scales... framelines. As the name says you unse it to create the right frsmeline for the DP's intended framing/delivery format.
No influence on any camera settings!
Cheers,
Jan
Re: Arri Mini LF with 2X Anamorphic Lens Compatibility
Posted: Mon Feb 03, 2020 10:34 am
by Felix
Hello,
I read that in a future firmware update for Mini LF, there will be a S35 6:5 mode?
Is this true?
Thank you.
Re: Arri Mini LF with 2X Anamorphic Lens Compatibility
Posted: Tue Feb 04, 2020 10:25 am
by Jan Heugel
Dear Felix,
we stated that S35 modes will follow, yes.
Please understand that I can't comment on which mode might come when.
Kind regards,
Jan