Has anyone figured out the power draw for the Mini? I can't seem to find the information in the documentation.
Thanks,
Jim Denault, ASC
ALEXA Mini power draw
-
- Posts: 3
- Joined: Mon May 09, 2016 5:51 am
-
- Posts: 568
- Joined: Wed Aug 13, 2014 3:15 pm
- Location: Munich, Germany
- Contact:
Dear Jim,
of course we have taken measurements...
@24fps with MVF-1: 50W
@24fps w/o MVF-1: 45W
@50fps with MVF-1: 55W
@100fps with MVF-1: 60W
@200fps with MVF-1: 75W
Please keep in mind these have been taken under lab-conditions. In extreme weathers the power-draw will be higher.
Best,
Jan
of course we have taken measurements...
@24fps with MVF-1: 50W
@24fps w/o MVF-1: 45W
@50fps with MVF-1: 55W
@100fps with MVF-1: 60W
@200fps with MVF-1: 75W
Please keep in mind these have been taken under lab-conditions. In extreme weathers the power-draw will be higher.
Best,
Jan
Jan Heugel
Application Engineer
Application Engineer
-
- Posts: 3
- Joined: Mon May 09, 2016 5:51 am
Thanks, Jan.
Is it pretty safe to assume the MVF-1 draws about 5W regardless of frame rate?
Is it pretty safe to assume the MVF-1 draws about 5W regardless of frame rate?
-
- Posts: 568
- Joined: Wed Aug 13, 2014 3:15 pm
- Location: Munich, Germany
- Contact:
Hey Jim,
I'd go with that number, yes.
Regards,
Jan
I'd go with that number, yes.
Regards,
Jan
Jan Heugel
Application Engineer
Application Engineer
-
- Posts: 15
- Joined: Tue Dec 22, 2015 5:19 am
from my understanding 3.2k and UHD both draw 75w power?
Justin Lovell
Associate CSC Cinematographer
Frame Discreet // 8/16/35 film scans
http://www.framediscreet.com
Associate CSC Cinematographer
Frame Discreet // 8/16/35 film scans
http://www.framediscreet.com
-
- Posts: 568
- Joined: Wed Aug 13, 2014 3:15 pm
- Location: Munich, Germany
- Contact:
Well... since the sensor is not running at 200fps at that time I'd assume something around 55W (factoring in we're writing at a high datarate at with MXF/ARRIRAW).
Best,
Jan
Best,
Jan
Jan Heugel
Application Engineer
Application Engineer